Three workstages wood CNC router for door CC-MS1325AS-3

Three workstages wood CNC router for door    
CC-MS1325AS-3

Features:
Asynchronous multi-head woodworking CNC Machine is customized for changing the
tools within 2-4 piece. It's not only economic, also can realize speedy auto tool change,
save the time of manual tool change, improve the working speed and precision
Main Special Configuration:
1. For this model Woodworking cnc machine,  using three 4.5KW Air-cooling spindle, the middle spindle can have two piece tools mainly for board's side drilling and milling.  So, it also called multi-function cnc router machine.
 
2. Three spindles can use three different tools for your three different designs' processing at the same time, which is similar with Auto-tool changer CNC Machine Center with three tools.
3. Taiwan Syntec Control System, with vernier Handle controller
4. Special Vacuum System with: vacuum table with movable suction block, vacuum pump and tubes
5. Higher gantry can be up to 300mm; Bigger gantry width can make sure every spindle's effective  working area.
6. Heavy bistratal Side plates, which can keep large supporting power for the cnc router gantry's moving perfectly.
7.  This CNC Machine  XYZ effective working area is 1300*2500*300mm.
8. Independently Electric Control Box, with perfect wiring and free moving pulleys.
10. Heavy Hard Steel Lath Body, dealing with Time-treatment, never to be deformed. keep the cnc  router machine working High stability.
11.  High-precision and bigger ball screw. Original Bigger Taiwan HIWIN Straight Square Guide Rail. To make sure the machine's working high-speed and high-efficiency.
12. The table is also with locating rods, in order to fix the working piece easily.
13. Provide protective barrier for the cnc machinery, in order to keep the safe operation.
14. Can work on the big wide board , also long and narrow board at the same time
15. Chencan CNC router can promise that our any set  machine is  the best quality and high-speed Wood carving and cutting CNC Router.
Technical Parameter
Description Parameter
X,Y Working Area 1300*2500mm
Z Working Area 200mm
Table Size 1440*3040mm
Resolution 0.01mm
Lathe Structure Seamless welded steel structure
X,Y Structure Rack and pinion transmission,
Hiwin square guide rail
Z Structure Germany rolling ball screw,
Hiwin square guide rail
Max. Idling Speed 35m/min
Spindle 4.5 KW
Spindle Rotate Speed 0-24000r/min, variable speed
Working Voltage AC380V/50Hz
Working Mode Stepper
Command G code (HPGL,U00,mmg,plt)
Operating System DSP with USB interface
Diameter of cutter φ3.175-φ12.7mm
Cooling Mode Water-cooling
Dust-collect Function Yes
Work-holding By suction or clamp
Net Weight 1300KG
Software Type 3, ArtCam, Wentai